OLD MAN EMU RELEASES FRONT UPPER CONTROL ARMS
Old Man Emu are pleased to release Front Upper Control Arms for a range of popular 4WDs.
OLD MAN EMU RELEASES FRONT UPPER CONTROL ARMS
Old Man Emu are pleased to release Front Upper Control Arms for a range of popular 4WDs. When an IFS vehicle is fitted with a suspension lift, the original caster and camber results can be pushed outside the factory adjustment settings.
IFS vehicles generally have a few degrees of adjustment in their camber and caster from factory, so adding an OME Upper Control
Arm brings the alignments cams back into an acceptable range for both caster and camber adjustment.
Features:
- Forged ball joint housing
- Forged eyelets
- Heavy duty greasable ball joint
- Old Man Emu ball joint protective cap
- GIIRO bushings - free pivoting, grease free and maintenance free
- Increased camber and caster for 50mm lift
- Mount provision for OE ABS wires
- Finished in ARB’s Integrit powder coat
- Boxed in pairs with foam inserts
- Fitting instructions included
- Old Man Emu branded outer sleeve
- Engineered for use with Old Man Emu GVM upgrades
- Tested and passed to meet VSB14 requirements
Wheel Alignment:
Please note after the fitment of Upper Control Arms, a vehicle wheel alignment will be required. If the vehicle is fitted with aftermarket tyres and/or rims, guard clearance should be checked. If contact is made, additional caster may be required. Further information regarding wheel alignment information can be found in the fitting instructions.
The OME Upper Control Arms will provide an increase between +2.5 and +3.5 degrees of caster and an increase of up to 1.5 degrees of negative camber (figures based off an approximate 50mm lift).
Application:
